Máy kéo sonalika DI-35

4 stars, based on 66 reviews.
0
sonalika DI-35
12 tháng

Technical Specification Standard Features DI-35 Engine Engine Type 3100 FLS without coldstart HP Category 35 No. of Cylinders 3 Aspiration Natural Aspiration Bore/Stroke(mm) 100/118 Cubic Capacity (cc) 2780 Rated RPM (+/-25mm) 2000 Air cleaner Wet ai

Giá bán niêm yết trên Website là giá phải tính thuế VAT. Kính mong quý khách lấy hóa đơn đỏ khi mua hàng để tuân thủ đúng quy định của pháp luật

 

Technical Specification

Standard Features DI-35
Engine
Engine Type 3100 FLS without coldstart
HP Category 35
No. of Cylinders 3
Aspiration Natural Aspiration
Bore/Stroke(mm) 100/118
Cubic Capacity (cc) 2780
Rated RPM (+/-25mm) 2000
Air cleaner Wet air cleaner
Max Torque (Nm) @ RPM 157(+/-5%)@1200 RPM(+/-100)
Transmission
Drive 2wd
Clutch Single clutch
Gearbox 8F+2R
Transmission Constant Mesh
PTO
PTO (rpm) 1000
PTO (actuation) Mechanical,Hand operated
Diff Lock
Diff. Lock(mechanical) No
Electrical
Battery 12V,88 AH
Alternator 12V,36 Amp
Seven pin trailer socket Yes
DCV
Auxiliary hydraulic circuit No
No.of Spool valves No
Steering
Steering Mechanical Steering
Tyre
Front 6*16
Rear 12.4*28
Speed(Forward)
Min Speed(Km/Hr) 2.83 @ 2000
Max Speed (Km/Hr) 29.4 @ 2000
Hydraulics
3 point linkage CAT2
Stay Bars Adjustable check chain
Hydraulic lifting capacity 1200 KG
Brakes
Brakes Oil Immersed brakes
Type of actuation Mechanical
Hand brake Yes
Others
Driver Seat Yes,Adjustable with safety Emblem.
Trailer hitch Standard rear toe hook
Fuel Indicator gauge Yes
Canopy No
Registration Plate with light No
Front Toe Hook yes
Front & rear weights Base weight 54 kg
Drawbar Linkage cross baar
ROPS No
Safety Switch
Neutral safety switch No
P.T.O Safety switch No
Clutch Safety Switch No
Capacity (ltrs)(+/-5%) approx
Fuel tank 55
Eng Oil 8.2
Hyd+Tran 50.3
Dimension & Weight(+/-5%)
Gross Weight(kg) 1990(Unballast)
Wheel Base (mm) 1970
Total Length (mm) 3550
Total Width (mm) 1740
Height (mm) 2310 ( upto exhaust pipe)
Ground Clearance (mm) min 400 (below Transdrain plug)
Front Track, (mm), min.-max. 1315 std. & 1540
Rear Track, (mm), min.-max. 1320 std. & 1445-1885
Turning Diameter
Without Brakes (m) 6.35 m ( R ) – 6.35 m ( L )
With Brakes (m) 5.6 m ( R ) – 5.80 m ( L )

 

Bạn cần thêm sản phẩm?

  • Tư Vấn Tại Hà Nội - 0966399628
  • Song Toàn 0966 399 628
  • Tư Vấn HCM - 0988866196
  • Gia Bảo 0388.330.368

Sản phẩm được sử dụng nhiều

Sản phẩm theo thời vụ